Stainless steel multi-function grinder for seasoning spices star anise cinnamon
High-quality shredder products Xulang WN-200 multi-function shredder, welcome to buy!
7000.00 ~ ¥ 52000.00 ¥ 7000.00 ~ ¥ 52000.00
|7000.00 /台 ¥ 7000.00 / set||台可售 500 units available|
|12800.00 /台 ¥ 12800.00 / set||台可售 500 units available|
|18500.00 /台 ¥ 18500.00 / set||台可售 500 units available|
|26500.00 /台 ¥ 26500.00 / set||台可售 500 units available|
|52000.00 /台 ¥ 52000.00 / set||台可售 500 units available|
- ¥ 13000Industrial material processing stainless steel efficient V-type mixer factory spot straight hair
- ¥ 13000High-efficiency V-type mixer for processing stainless steel
- ¥ 8800Factory direct shipment of multi-grain nuts electric heating automatic roaster
- ¥ 8800Factory sale straight hair chestnut melon seeds gas heated stainless steel fast roaster
- ¥ 8800Factory production direct sales melon seeds pine nuts electric heating processing stainless steel automatic roasting machine
- ¥ 8800Factory direct delivery buckwheat oat stainless steel electric heating roaster
Feed size ≤:
Grinding and processing of grocery and medicinal materials
10-120kg / h
4200r / min
480 * 520 * 1040mm
Material moisture content:
220 / 380v
主要适用于制药、化工、食品等行业的物料粉碎。 Special stainless steel multi-functional pulverizer for seasoning spices star anise cinnamon is mainly used for pulverizing materials in the pharmaceutical, chemical, food and other industries. Forbidden to crush flammable and explosive materials. It is prohibited to smash metal objects. Not suitable for crushing large materials. It is not suitable for crushing materials with too high water content and too high oil content, because the water or oil after crushing will form sauces, which will block the screen, affect the discharge, cause poor discharge, and even get stuck or stuffy. phenomenon. This machine is not suitable for crushing all sticky materials, nor is it suitable for materials that become soft and sticky after heating. By using the relative motion between the moving teeth and the fixed teeth, the material to be crushed is passed through the high-speed collision, striking, and friction between the moving teeth and the stationary teeth, and the collision, striking, and friction between the materials. Crushing is obtained, and the crushed material falls into the aggregate bucket or cloth bag below the crushing cavity through a screen. Generally, the bag is used for charging. The dust is left in the bag, and the air and a small amount of extremely fine dust pass through the gap of the bag and are discharged out of the bag.
1. The smaller the particles of the crushed material, the larger the output;
2. The lower the moisture content of the material, the greater the output;
3. The thicker the screen, the greater the output;
4. The more brittle the material, the greater the output.
With particular emphasis on:
1. The square of the external power cord of the machine must be greater than or equal to the power cord that comes with the machine. Otherwise, the motor and power cord may become hot, soft, or even scorched due to the high current of the wire.
2. A professional electrician should be installed with an appropriate type of earth leakage protector on the external power cord of the machine in accordance with the stipulated grounding wire, and the machine's main shaft should be operated in the specified direction to ensure the safety of electricity and machine use.
3. If the crushed material is pigment or has toxic side effects, it is recommended to place the machine in an independent workshop and take certain protective measures. In order to reduce dust flying as much as possible, double-layer cloth bags can be adopted. The inner bag should be small and thin, and the outer bag should be large and dense. In addition, the cloth bag should be as long as possible. Use too short cloth bag for loading. Because the air discharged from the grinder is too much, the pressure inside the cloth bag will increase and it will be more likely to cause dust overflow.
1. Simple structure, easy assembly and disassembly of the crushing cavity, and easy cleaning.
GMP 的要求。 2. This machine is made of all stainless steel and meets the requirements of GMP .
3. Smooth operation, low noise and small vibration.
4. Simple operation. Fineness can be controlled by changing the screen.
Instructions and precautions:
1 件木架包装，客户收货后将木架打开，将主机安放在水平地面上，可以在机脚上垫橡胶垫。 1. This machine is generally packed in a wooden frame. After receiving the goods, the customer opens the wooden frame and places the host on a level ground. Rubber feet can be placed on the feet.
2. Before starting the machine, you should carefully check whether the wires are complete and the power cord is bare. You should check the tightness and firmness of the machine components, whether the oil cup has sufficient lubricant, and lock the door cover outside the crushing chamber before connecting it. Turn on the main power, press the switch, and run the empty machine for more than ten minutes without abnormal sounds and vibrations, and then start feeding. If the machine starts to sound abnormally, you should immediately turn off the switch and turn off the main power. After finding out and solving the problem, you can turn on the machine again.
3. Different models have different output. The smaller the machine, the lower the output. No matter how large the model is, there is a limit on the output. Pay attention to the control of the feeding amount. In principle, the amount of powder produced by the machine per minute should not be higher than the amount of powder. If you throw more, less powder, the machine will overload the motor because there is too much material in the crushing chamber. If the speed of the motor slows down or does not turn, you should immediately turn off the machine switch and disconnect the main power, and then open the cover After cleaning the material in the crushing chamber, the door can be turned on again after it is locked.
比如 200 粉碎机，我们标注的产量是 10-120kg/h, 不内行的客户常常会质疑机器的真实产量，实际情况是这样：不同的物料性质、不同大小的物料颗粒，加上不同的筛网，产量是大不相同的，甚至相差几十倍直至上百倍。 4. About the output, such as 200 grinder, we marked the output is 10-120kg / h, non-expert customers often question the true output of the machine, the actual situation is this: different material properties, different size material particles, Adding different screens, the output is very different, and even varies by dozens of times up to hundreds of times. 2 毫米、 3 毫米甚至更大孔径的筛网，产量要超过 120kg/h ，那是轻而易举的事情。 If the material itself is very dry, brittle, the particles are relatively small, and the fineness of the crushing is not high, even using a screen with a diameter of 2 mm, 3 mm or even larger, the output must exceed 120 kg / h , which is a breeze. 0.4 毫米孔径，想要产量达到 120kg/h ，这是不可能的。 Conversely, if the material to be crushed has large particles or high water content or high fiber content, strong toughness, etc., and requires crushing to be very fine, configure a fine screen such as a 0.4 mm pore size, and want to produce 120kg / h . This is impossible.
- Guangzhou Xulang Machinery Equipment Co., Ltd.
- 经理 Xulang Machinery Manager
- No. 9 Longgang Road, Longgui, Baiyun District, Guangzhou City, Guangdong Province
Featured for you
Factory spot straight hair grains spices processing stainless steel mill2900 ¥ 2900
Stainless steel mill for stainless steel mills2900 ¥ 2900
Corn and wheat grain processing stainless steel all-purpose grinder spot straight hair7000 ¥ 7000
Supermarket shop special grains, herbs, spices processing, stainless steel mill2900 ¥ 2900
Pepper cumin spice processing small desktop stainless steel mill factory spot2900 ¥ 2900
Factory production and sales of moisture-removing health food powder processing stainless steel mill2900 ¥ 2900
Small-scale constant temperature drying box for processing straight hair miscellaneous grains and medicinal materials produced in Shandong1650 ¥ 1650
Shop workshop dedicated scented tea medicinal materials processing timing constant temperature transport wind drying oven6150 ¥ 6150
Factory production direct selling agricultural products processing6150 ¥ 6150
Hunan factory straight hair sponge pearl cotton processing iron crusher5300 ¥ 5300