Sweep, enter the phone to search for good goods
High-quality titanium and titanium alloy products Li Fuyuan Japan Sumitomo Germany imported TC4 titanium alloy, welcome to buy!
165 ¥ 165
千克 ≥1 kg
Available for sale
千克 1089898 kg
TA1 TA2 TB2 TC4
Guangdong Japan Germany United States
Li Fuyuan imported from Japan Sumitomo Germany
High-precision TC4 titanium alloy material imported from Japan TA11 titanium alloy rod titanium alloy book plate
Li Fuyuan Metal Technology (Shenzhen) Co., Ltd .:
Titanium plate, titanium rod, titanium strip, titanium wire, titanium foil, titanium tube, titanium alloy plate, titanium alloy rod, titanium alloy tube, titanium alloy strip, titanium alloy wire, titanium nickel alloy wire, nickel titanium alloy memory wire, etc.
Industrial pure titanium TA1, TA2, TA3 have excellent stamping performance. It can be used in various forms of welding, with good welding performance, and the welded joint can reach 90 strength of the base metal. Easy to saw and grinding wheel cutting, good machining performance. Excellent corrosion resistance is used for parts under 350 with low stress and parts stamped into various complex shapes. Such as thermal power plant condensers; marine corroded piping systems
, Valves, pumps; chemical heat exchangers, pump bodies, distillation towers; desalination systems, platinum plating anodes; aircraft skeletons, skins, engine parts, beams, etc.
Titanium alloy TA6 has good welding performance and high creep strength, but the process is low in plasticity and can be deformed in the hot state. When the alloy is subjected to axial load, it is not sensitive to the notch and the cutting performance is still good. Parts and Welding Parts
Titanium alloy TA7 has poor stamping properties and good thermoplasticity. It can perform various forms of welding, with good performance, and the strength and plasticity of the welded joint can be equal to the base metal. Machining performance is the same as industrial pure titanium. Good corrosion resistance, good high temperature thermal stability. Do long-term work below 500, can be used for various die forgings.
Titanium alloy TA8 has good thermoplasticity. It can be welded in various forms with good weldability. Machinability is the same as industrial pure titanium. Good oxidation resistance Long-term working parts below 500. Can make engine compressor discs and blades
Titanium alloy TC1 has good stampability. It can be welded in various forms with good weldability. Machinability is the same as industrial pure titanium. Good oxidation resistance for parts below 400. Suitable for various plates, stamped and welded parts
Titanium alloy TC2 under 350, 100h endurance strength above 400MPa, good plasticity in hot working. When heated to 350-400, there is no tendency to become brittle.Therefore, it can be used to weld parts that work at high temperatures to make parts below 500, weldments, forgings, and bending parts.
Titanium alloy TC4 has poor stampability and good thermoplasticity. Can be used in various forms of welding, the strength of the welded joints can reach the strength of the base metal 90. Machining performance is still good, it is necessary to use carbide cutting tools, large cutting speed, slow speed, and sufficient cooling. Good corrosion resistance and good thermal stability. One of the most widely used titanium alloys for long-term work below 400
Titanium alloy TC5 is stable below 350, and its plasticity decreases at higher temperatures. Parts that can be deformed below 350 in the hot state such as forging and stamping
Titanium alloy TC9 has good thermoplasticity. Machinability is the same as TC4 alloy. High corrosion resistance. Thermal stability is still good for long-term working parts below 400. Can make compressor discs and blades
Titanium alloy TC10 has poor stampability and good thermoplasticity. Can be used in various forms of welding, the strength of the welded joints can reach the strength of the base metal 90. Machining performance is the same as TC4 alloy. Good corrosion resistance. Good thermal stability, significant heat treatment effect, good hardenability
1 The chemical composition of titanium and titanium alloy rods shall meet the requirements of GB / T 3620.1. When the re-inspection is required, the allowable deviation of the chemical composition shall meet the requirements of GB / T 3620.2
2 The diameter or side length of the hot-worked bar and its allowable deviation should meet the requirements of Table 1.
3 After hot working, the diameter of the bar and cold-rolled and cold-rolled, cold-drawn bar shall comply with the requirements of Table 2.
4 After hot working, the out-of-roundness of the bar after turning (grinding) should not be greater than half of its dimensional tolerance
5 The indefinite length of the processed bar is 3006000mm, the indefinite length of the annealed bar is 3002000mm, and the fixed or double length should be within the range of the indefinite length. The allowable deviation of the fixed length is + 20mm; The incision of the bar should also be taken into account, each incision is 5mm. The length of the fixed or double rule should be specified in the contract
Uses of titanium alloys Titanium alloys have high strength and small density, good mechanical properties, good toughness and corrosion resistance. In addition, the titanium alloy has poor process performance and is difficult to cut. In hot processing, it is very easy to absorb impurities such as hydrogen, nitrogen, nitrogen and carbon. There is also poor abrasion resistance and complicated production processes. The industrial production of titanium began in 1948. The development of the aviation industry has made the titanium industry develop at an average annual growth rate of about 8%.
At present, the world's annual output of titanium alloy processed materials has reached more than 40,000 tons, with nearly 30 kinds of titanium alloys. The most widely used titanium alloys are Ti-6Al-4V (TC4), Ti-2.5-Sn (TA7) and industrial pure titanium (TA1, TA2 and TA3).
Titanium alloys are mainly used to make aircraft engine compressor parts, followed by rockets, and high-speed aircraft structural parts. In the mid-1960s, titanium and its alloys have been used in general industry for making electrodes for the electrolytic industry, condensers for power stations, heaters for oil refining and desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion resistant structural material. It is also used in the production of hydrogen storage materials and shape memory alloys.
Hello! The products sold by the company are metal raw materials. Because the price of metal materials fluctuates every day, the prices marked on the products are for reference only.
The price is subject to the customer service quote. In order to facilitate your purchase, the following points are hereby announced:
1. To save time, please inform the customer service of the grade, specification, quantity, tolerance and processing method of the material you need;
2. Our materials can be slit, the slit width is narrow 2.0mm (thickness below 0.6mm), the slit width tolerance is
3. Spot specifications are shipped the same day, non-standard specifications and special grade materials can be customized;
4. Our company can issue 17 special VAT tickets.
We will try our best to provide our customers with good products and good service. I wish a happy cooperation!
Featured for you
Inconel Inconel screen, high temperature corrosion Incon
Spot titanium alloy wire industrial pure titanium wire TA1 TA2TA
Sodium hypochlorite generator titanium electrode titanium anode group ruthenium iridium titanium anode
Titanium wire manufacturers customize ultra-fine titanium wire 1mm titanium wire price
Industrial titanium plate spot TA1 pure titanium plate sale bendable titanium plate
MMO tubular anode ruthenium-iridium-titanium tube for cathodic protection has been produced for many years
Thousand tons spot supply TA2 Grade3 0T4-
30 mesh \ 34 mesh \ 40 mesh \ 80 mesh iron chromium aluminum mesh, resistant to 1
Imported titanium wire TA1 TA2 TC4 titanium alloy wire resistant
Titanium anode for sterilization of large pool water
Your inquiry about the company has been successfully submitted, please pay attention to answering the supplier call.
Make sure businesses get in touch with you the first time
Please leave your contact information
Please enter the correct contact phone number
Please enter a title or company name
please enter verification code